Продукти за 60 a (24)

Transmax Dual with Smooth Drive TechnologyTM is a fully synthetic, smooth-running transmission oil that was specially developed for dual clutch transmissions from various car manufacturers such as Ford, Volvo, Chrysler, Dodge and Mitsubishi . Also recommended for use in the DQ 250 (DSG) dual clutch transmission according to VW part number G 052 182 for VW, Audi, Seat and Skoda. Transmax Dual offers original quality as it is provided for in the factory filling by the manufacturers listed. Specifications Audi / VW TL 52529 (G 052 529) Castrol Recommendations Recommended for use in: Ford WSS-M2C-936-A (Dual Clutch), Volvo, Chrysler (Europe), Mitsubishi, Peugeot using Getrag DCT, VW G 052 182; PSA Transmission Oil 9734 52; Dia Queen SSTF-1 VW, Seat, Skoda 6-speed Dual Clutch Transmission (DSG) Container size:60 Product number:1706539

BEDIA intelligent tank sensor ITS 60 is used to monitor the filling levels of Diesel fuels. The sensor is able to automatically recognize what kind of Diesel fuel (Bio-Diesel, Summer-/Winter-Diesel etc.) is present and calibrates itself to it. The capacitative measurement principle permits measurement of levels without mechanically moving parts. This considerably increases stability and operating safety. Mechanics The new tank sensor ITS 60 is characterized by a particularly stable, but light mechanical system specially designed for “Heavy Duty Applications”. The mounting flange and measurement tube are constructed from die cast aluminium. This construction permits the insertion of tank sensors up to 1200 mm in length, without additional support on the tank floor. The flange hole distribution is compatible with commercially used tank sensors. This means that this system can be used without expensive conversions.

Der Präzisionsvolumendosierer eco-PEN700, made by ViscoTec, ermöglicht viele Einsätze für den niedrig- bis mittelviskosen Dispensing-Bereich. Der preeflow® eco-PEN ist ein rotierendes, absolut druckdichtes Verdrängersystem, welches selbstdichtend aus Rotor und Stator besteht. Durch die gesteuerte Drehbewegung des Rotors wird durch Verdrängen des Mediums im Stator die Förderung erzeugt. Ein Fördern ohne Veränderung des Mediums ist gewährleistet. Da die Förderung auch rückwärts erfolgen kann, garantiert preeflow® einen sauberen, kontrollierten Material- bzw. Mediumabriss ohne Nachtropfen. Abmessung:Länge 274 mm, □ 34 x 34 mm, ø 40 mm Dosiergenauigkeit:± 1 % (abhängig vom Dosiermedium) Dosiervolumen:ca. 0,53 ml/U Gewicht:ca. 750 g Maximaler Dosierdruck:8 bis 10 bar Mediumtemperatur:+10°C bis +40°C Minimale Dosiermenge:0,06 ml Selbstdichtheit:ca. 2 bar (viskositätsabhängig) Volumenstrom nach Viskosität/Vordruck:5,3 bis 60,0 ml/min Wiederholgenauigkeit:> 99 %

Lichtkuppel 60x60cm aus 2 formgleichen Schalen aus Polymetylmethacrylat (PMMA).

Mit zwei Hubgeschwindigkeiten, Überlastschutz und Schlaffseilschalter sowie den vielfältigen Lastaufnahmemitteln sind diese schnellen Gerüstbauaufzüge ideale Helfer für den rationellen und trotzdem sicheren Transport von Gerüstteilen und Baumaterial. Der handliche Antrieb der Seiltrommel wird nicht nach oben transportiert, sondern einfach unten am Gerüst befestigt. Der leichte Schwenkarm wird oben in der gewünschten Höhe am Gerüst angebracht. Große Vorteile bieten die GEDA-Gerüstbauaufzüge vor allem durch die schnelle Montage und die Möglichkeit eines raschen Umsetzens. Die maximale Arbeitshöhe beträgt 40 m und mit höher gesetzter Winde bis zu 76 m. Die flinken Helfer werden neben den Gerüstbauern hauptsächlich von Dachdeckern, Malern etc. zum Materialtransport am Gerüst eingesetzt. Transportgut:Material Tragfähigkeit (Material):60 kg Förderhöhe:76 m Seillänge:81 m Hubgeschwindigkeit:23 m/min / 69 m/min Stromanschluss:0.25 kW /0.75 kW /230 V /50 Hz /16 A

Aral HighTronic 5W-40 is a high-performance, low-friction engine oil using Aral synthetic technology. It can be used in many cars with petrol or diesel engines (please note manufacturer specifications). The balanced formulation also meets the high wear protection requirements according to VW 505 01 (pump-nozzle specification). The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C3 API SN/CF Meets Fiat 9.55535-S2 Meets Ford WSS-M2C917-A GMdexos2™ * MB approval 229.31/ 229.51 Porsche A40 Renault RN 0700 / RN 0710 VW 505 00/ 505 01 Container size:60 Product number:1508529

Mineral oil-based transmission fluid for applications in which performance class API GL-4 is required. Approved for ZF manual transmissions. Advantages high thermal stability to protect against deposits and oil thickening ensures the operational safety and long service life of the lubricant and unit excellent wear protection and load-carrying capacity for long service lives Specifications API GL-4 MAN 341 Type Z2 ZF TE-ML 02B, 17A Container size:60 Product number:1655402

GLYSANTIN® G30 (January 2017) GLYSANTIN® G30 is an ethylene glycol-based coolant that must be diluted with water before use . GLYSANTIN® G30 contains an inhibitor package based on organic acid salts (OAT coolants). GLYSANTIN® G30 is free of nitrites, amines, phosphates, borates and silicates. Properties GLYSANTIN® G30 provides excellent protection for engines against corrosion, overheating and frost. It effectively prevents corrosion and deposits in the cooling system with its important components such as cooling channels in the cylinder head and engine block, radiator, water pump and heater core exchanger. Meets the requirements of the following coolant standards: - AS 2108-2004 - ASTM D 3306 - ASTM D 4985 - BS 6580:2010 - CUNA NC 956-16 - AFNOR NFR 15-601 - Önorm V 5123 - JIS K 2234:2006 - SAE J1034 - SANS 1251:2005 - China GB 29743-2013 Officially approved by: - ​​Audi / Seat / Skoda / VW - Bentley / Lamborghini - DAF - Daimler Product number:1738281 Container size:60 Product group:Radiator antifreeze

Castrol Transmax Axle EPX 80W-90 is a high-pressure gear oil of API class GL-5 for highly loaded axle drives and final drives (AP axles). Castrol Transmax Axle EPX 80W-90 can also be used in manual transmissions if the manufacturer requires an API GL-5 oil . Castrol Transmax Axle EPX 80W-90 protects against seizing and wear even under severe operating conditions. The gears remain clean and are protected from corrosion. Castrol Transmax Axle EPX 80W-90 ensures high functional reliability. Specifications API GL-5 MAN 342 M2 ZF TE-ML 05A, 12E, 16B, 17B, 19B, 21A Further information Transmax Axle EPX 80W-90 is Container size:60 Product number:2039267

CLEANLIFE® gasoline is a pure refinery product and does not contain any crack products. In contrast to conventional gasoline, it does not contain any reactive substances that oxidize and polymerize, but is chemically stable and can therefore be stored for a long time. There are no deposits that negatively affect performance. CLEANLIFE® equipment gasoline 2-T with 2% fully synthetic high-performance oil is available as a ready-mixed 2-stroke gasoline for chainsaws, brush cutters, hedge trimmers, mopeds, grass trimmers and other two-stroke engines. Advantages Significant reduction in the health burden for users Aromatics and sulfur content reduced to a minimum Free of benzene Clean, residue-free combustion Minimal impact on the environment Long shelf life Product number:1199482 Container size:60 Product group:2-stroke

Aral HighTronic J is a modern low-ash smooth-running engine oil in Aral Synth technology. Can be used for petrol and diesel engines (especially with diesel particulate filter DPF) where a product according to ACEA C2, API SN (or earlier) or Peugeot PSA Approval B71 2290 is required. The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C2 PSA Approval B71 2290 Container size:60 Product number:1508523

Aral HighTronic C is a high-performance engine oil in Aral synthesis technology specially developed for cars with diesel particulate filters that require an ACEA C1 or C2 engine oil ideally combined with Aral Low SAPS technology for maximum service life of the diesel particulate filter Low ash with fuel savings in conjunction with very high-quality base oils and additives Application - excellently suitable for vehicles from the former Ford PAG group: Jaguar and Land Rover - very suitable for French car brands: Peugeot and Citroen - meets the high requirements of Japanese car brands: Mitsubishi, Mazda, Honda, Subaru, Suzuki, Toyota and Nissan -suitable for American vehicles with European diesel engines , e.g. Jeep -can be used on commercial vehicles of Japanese design and Italian origin, e.g. IVECO -please note the respective vehicle-specific specifications Specifications ACEA C1, C2 Meets Ford WSS-M2C934-B Jaguar Land Rover engine oil specification STJLR.03.5005 Container size:60 Product number:1677987

Aral HighTronic R is a modern low ash smooth-running engine oil in Aral Synth technology. It can be used in diesel engines (particularly with diesel particulate filter DPF) where a product according to ACEA C4 is required, such as in Renault cars with diesel particulate filter (DPF). The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C4 MB approval 226.51 Renault RN 0720 Container size:60 Product number:1508527

Aral EcoTronic F 5W-20 is a high-performance engine oil using Aral synthesis technology specifically developed for the Ford EcoBoost engines, which require an engine oil in accordance with the Ford WSS-M2C948-B specification. The product can also be used in many other modern Ford petrol engines that require engine oil of the Ford WSSM2C913-B, WSS-M2C913-C or WSS-M2C925-B specification (with the exception of Ford Ka, Focus ST and Focus RS). . The innovative additives in the Aral EcoTronic F 5W-20 offer excellent wear protection and additional potential for fuel savings. Application In addition to the applications already mentioned, Aral EcoTronic F 5W-20 can also be used in engines for which the manufacturer recommends or requires an engine oil in accordance with API SN or ILSAC GF-5 or their previous specifications with Container size:60 Product number:1508548

Low-friction engine oil with Aral synthesis technology. Aral BlueTronic II SAE 10W-40 can be used in gasoline and diesel engines (including turbocharged engines) used in cars or light commercial vehicles. Specifications ACEA A3/B4 API SP Meets - Fiat 9.55535-D2 MB Approval 229.3 VW 5 01 01 / 505 00 Container size:60 Product number:1378

Castrol Transmax Manual Transaxle 75W-90 is a modern, fully synthetic high-performance manual transmission lubricant. Advantages excellent wear protection and shiftability for optimal use in transaxle transmissions - extended transmission service life minimized switching forces under all climatic conditions special protection during cold starts due to low pumping capacity reduced temperature level and excellent transmission cleanliness with extended service life Specifications API GL-4+ VW 501 50 SAE Class according to J306 before 1998 Container size:60 Product number:2036557

DIESELFIxx 60 l/min-230 V 50 Hz-EUS-EBZM-ZVABD-4 m specification Vane pump with integrated bypass (23 430) Switching on and off by removing the nozzle Hydraulic siphon protection according to WHG (Water Resources Act), permanent effective Flow counter NUMERIxx³, three-digit (23 192) Automatic nozzle with type approval and swivel joint, ZVABD (23 168) Dispensing hose, 4 m, DN 19, G 1" a, G 1" i (23 155 957) Foot valve with suction strainer (19 890) Fassverschraubung, G 2" a, G 1" a Intake hose required according to assembly: 1,6 m (23 156) 2,0 m (23 158 959) 4,0 m (23 155 950) 6,0 m (23 155 956) Packed in a box Product number:1635983 Container size:1 Product group:pump

Aral SuperTurboral 5W-30 is a low-friction engine oil for use in almost all commercial vehicles that do not require a so-called "low SAPS oil". It enables significantly extended oil change intervals and offers significant fuel saving potential compared to conventional multi-grade engine oils. The excellent low-temperature properties and optimal wear protection, even under severe operating conditions, offer a wide range of applications. Advantages -Extended oil change intervals and thus reduction in operating costs -Excellent soot-carrying capacity reduces abrasive wear in the engine -Best engine cleanliness thanks to low deposits and an optimized detergent system -All-year-round savings potential with quick oiling thanks to synthetic base oils with excellent flow behavior -Optimized wear protection Specifications ACEA E4, E7 MB approval 228.5 Container size:60 Product number:1508773

CLEANLIFE® gasoline is a pure refinery product and does not contain any crack products. In contrast to conventional gasoline, it does not contain any reactive substances that oxidize and polymerize, but is chemically stable and can therefore be stored for a long time. There are no deposits that negatively affect performance. CLEANLIFE® equipment gasoline 4-T is available without any oil admixture for lawnmowers, karts, generators, motorboats and other four-stroke engines. Advantages Significant reduction in the health burden for users Aromatics and sulfur content reduced to a minimum Free from benzene Clean, residue-free combustion Minimal Influence on the environment long shelf life Product number:1775367 Container size:60 Product group:4-Stroke

Castrol Transmax Manual V 75W-80 with Smooth Drive TechnologyTM is a fully synthetic 75W-80 gear oil with special EP performance, excellent synchronous behavior and fuel saving potential. It is suitable for transaxle systems, manual transmissions, transfer cases and axles where a transmission oil according to API GL 4 is required. Castrol recommends Transmax Manual V 75W-80 for 5- and 6-speed manual transmissions from Volkswagen, Audi, Seat and Skoda. Specifications API GL-4+ Audi TL 52532 Castrol Recommendations Suitable for use where the following is called for: VW G 052 171, VW G 052 527, VW G 052 512, VW G 052 532, VW G 055 532 Container size:60 Product number:2046105

ARAL HighTronic M 5W-40 is a high-performance engine oil in Aral synthesis technology for demanding driving conditions in gasoline and diesel vehicles from the following vehicle manufacturers, among others: at Mercedes Benz for cars with gasoline and all diesel engines without particle filters, excellently suitable for most AMG and Brabus vehicles For petrol and diesel engines, including those from the VW Group Specifications ACEA A3/B4 API SP MB approval 229.3/ 229.5/ 226.5 VW 502 00/ 505 00 BMW Longlife-01 Porsche A40 Renault RN0700 / RN0710 Container size:60 Product number:1508525

The modern low-ash formulation of Aral Hightronic G SAE 5W-30 in Aral Synth technology ensures excellent wear protection, clean engines and also supports the effectiveness and service life of the diesel particulate filters. Specifications ACEA C3 API SN/CF BMW Longlife-04 MB approval 229.31/ 229.51/ 229.52 Container size:60 Product number:1508501

The innovative precision-volume-dispenser eco-PEN700 made by ViscoTec offers a wide range of applications for low to medium-viscosity dispensing. preeflow® eco-PEN is a rotating and perfectly pressure-tight displacement system. Self-sealing rotor/stator design. Conveyance action by medium displacement in the stator through controlled rotor rotation. Safe conveyance without any modification of the medium. With its suck back option, preeflow® ensures clean and controlled material or medium cut-off while preventing post-dripping effects.

Aral HighTronic F 5W-30 is a high-performance engine oil using Aral synthesis technology specifically for Ford, Volvo, Jaguar and Land Rover cars with gasoline or diesel engines. It can also be used wherever an ACEA A1/B1 or A5/B5 specification is recommended. The unique formulation meets Ford WSS-M2C913-D, ...913C, ...913B and ...913-A requirements and is recommended for use in Ford diesel engines. Advantages -excellent aging, oxidation and wear protection -potential for fuel savings Specifications ACEA A1/B1, A5/B5 API SL/CF ILSAC GF4 Meets Ford WSS-M2C913-A, WSS-M2C913-B, WSS-M2C913-C, WSS-M2C913-D Container size:60 Product number:1508500